Pilot Scale High Pressure Magnetic Mixer Magnetically Coupled Mixers
Magnetic agitator with shaft for high pressure, process scale-up reactors


FEATURES

• Torque capacity & shaft size varies by model between 27 to 300 inch-lbs (3 to 34 N-m) & 0.38 to 0.875" (10 to 22 mm) respectively
  
  
• Torque capacity is suitable for optional geared motor & large impellers used to mix materials with high viscosity & specific gravity
  
  
• Rare earth, permanent magnets provide consistent, high performance for any experimental process for an indefinite time
  
  
• Cooling jacket protects the magnets & bearings from "eddy current" heat in high speed operation & from high process temperatures
  
  
• Pressure ratings vary by model between 3,000 to 6,000 psig (207 to 414 bar) @ 650°F (343°C) temperature
  
  
• Speed rating varies by model between, 2,000 to 3,250 rpm & is used in process research for high pressure chemistry
  
  
• Integrally mounted tachometer sensor over the mixer shaft allows true closed loop rotational speed control
  
  
• Purge fitting flushes chemical /petrochemical residues from earlier reactions out of the MagneDrive to control cross-contamination
  
  
• Standard materials vary by model & include corrosion resistant A-286 & 316SS alloys; other alloys are offered
  
  
• Obtain expert, process equipment advice from the manufacturer & ongoing support from the local, factory approved supplier
  

BENEFITS

High ratings for torque capacity & system pressure allows reactor agitator process versatility. MagneDrive^® magnetically coupled drives have proven successful as autoclave mixers. They are proven to maintain a leak-tight seal despite high pressure, vibration, varying shaft speed & thermal cycles. Lubricant contamination of the batch is eliminated. MagneDrives^® can be part of a high pressure reactor & controlled with process instrumentation to make a complete system.