MAG 075 Series MagneDrive®(high pressure magnetic stirrer with top entry shaft) eliminates
dynamic seals for trouble-free mixing. Torque capacity is appropriate
for fluids with elevated viscosity & specific gravity. MAG075 MagneDrives® are used as reactor mixers on 100 to 4,000ml Bolted Closure, ZipperClave®,
& EZE-Seal® high pressure chemistry reactors. Multiple
magnetic mixers can be installed on irregularly shaped vessels to take
advantage of the compact, direct threaded mounting.
A magnetically coupled, packless, rotary impeller system designed to provide continuous, high-speed mixing without contamination.
Laboratory High Pressure Magnetic Mixer: Magnetically Coupled Mixers
Magnetic agitator with shaft of high pressure laboratory reactors
FEATURES
Sized for high
speed agitation of experiments with sealed, single vessel up to 1 gallon (4 Liters) capacity
Select 7 inch-lbs (0.79 N-m) torque capacity for most laboratory high
pressure reactor agitators
Select 16 inch-lbs (1.8 N-m) torque capacity for high viscosities & breaking-up
fillers binding the blades of an autoclave agitator
0.5" (12.7mm) diameter with 8.38" (212 mm) long impeller shaft may be
run @ 3,300 rpm maximum speed without a foot bearing
6,000 psig (414
bar) pressure rating @ 650°F (343°C) temperature rating is appropriate for nearly all applications & apparatuses
Rare earth, permanent
magnets provide consistent, high performance for any experimental process
for an indefinite time
Cooling jacket
protects the magnets & bearings from "eddy current" heat in
high speed operation & from high process temperatures
Integrally mounted
tachometer sensor over the mixer shaft allows true closed-loop rotational
speed control
Stocked materials
are 316SS & HASTELLOY® C-276; other chemical & petrochemical
resistant alloys are available
Obtain expert research
equipment advice from the manufacturer & ongoing support from the local,
factory approved supplier
BENEFITS
Leak-tight seal despite high
pressure, vibration, varying shaft speed & thermal cycles. Lubricant contamination
of the batch is eliminated. Compact, direct thread mount leaves cover
space for the process connections. Many impellers are offered including
Dispersimax, which draws headspace gas & vapors into the liquid. MagneDrives® can be part of a high pressure laboratory reactor or easy open laboratory
reactor & controlled with our process instrumentation to make a system .
