s Divisional Home
Autoclave Engineers
Catalyst Reactors - Available from Micro to Pilot scale in stainless steel or assorted high-temperature, corrosion resistant alloys. Parker Autoclave Engineers offer a variety of reactors for use with liquids, gases or solids with stationary, spinning or falling catalyst baskets.


A full range of apparatus used for
catalyst research.



Berty Stationary Basket Catalyst Reactor
Recycling gas/vapor phase catalyst research tool
Circulate gas past a stationary catalyst bed using 2,500 rpm vane blowers, either 3" (75 mm) or 5" (125 mm) OD, contained within the high pressure reactor • Three different pressure ratings between 2,450 to 5,800 psi (169 to 400 bar) • Two temperature ratings 650°F & 1,200°F (343°C & 649°C)

dd
Click here to view Product Information
 Berty Stationary Basket Catalyst Reactor

Micro-Berty Catalyst Testing Reactor
Miniature version of the Berty Stationary Basket Catalyst Reactor
Circulate the gas & vapor past the stationary catalyst bed using 5,000 rpm, 1" (25 mm) OD vane blower, contained within the high pressure reactor • Pressure rating of 5,000 psig (349 bar) • Temperature rating of either 650°F (343°C) or 1,000°F (538 °C) • HASTELLOY® C-276 wetted materials

dd
Click here to view Product Information
Micro-Berty Catalyst Testing Reactor

Robinson-Mahoney Catalyst Testing Reactor
The most widely used supported catalyst testing reactor for multiple phases
Popular reactor design circulates liquid reactants past a stationary catalyst bed. Impellers (1,000 rpm) draw fluid into the center of an annular catalyst basket • Pressure ratings 5,400 psig (372 bar) @ 300 cm3 & 5,800 psig (400 bar) @ 1,000 cm3 • Temperature rating 650°F (343°C)

dd
Click here to view Product Information
Robinson-Mahoney Catalyst Testing Reactor

Micro Robinson-Mahoney Catalyst Reactor
Test supported catalysts with this "Micro" reactor for multiple phases
Miniature version of the Robinson-Mahoney reactor design circulates liquid reactants past a stationary catalyst bed. Impellers (5,000 rpm) draw fluid into the center of an annular catalyst basket • Pressure rating 5,000 psig (345 bar) • Temperature rating 650°F (343°C) • HASTELLOY® C-276 material

dd
Click here to view Product Information
Micro Robinson-Mahoney Catalyst Reactor

Mahoney-Robinson Spinning Basket Reactor
Spinning annular basket for supported catalyst testing in fluid reactants
One of the Parker Autoclave Engineers catalyst testing reactors for hydro-liquefaction, liquefaction, petroleum cracking, surface chemistry & heterogeneous catalysis research. This design spins a catalyst basket in liquid reactants • Pressure rating 5,500 psig (379 bar) • Temperature rating 650°F (343°C)

dd
Click here to view Product Information
 Mahoney-Robinson Spinning Basket Reactor

Carberry Spinning Basket Catalyst Reactor
A versatile supported catalyst testing reactor with internal circulation
This multipurpose design spins either a 3" (75 mm) or 5" (125 mm) OD catalyst basket from 0 to 2,500 rpm in order to circulate gases & liquids past solid catalysts • Three different pressure ratings between 2,450 to 5,800 psig (169 to 400 bar) • Two temperature ratings 650°F & 1,200°F (343°C & 649°C)

dd
Click here to view Product Information
Carberry Spinning Basket Catalyst Reactor

Harshaw Falling Basket Catalyst Reactor
Staged gas/solid & liquid/solid catalyst testing reactor
This sequential, spinning basket design allows the scientists to regenerate / condition / treat / activate / surface modify the catalyst in a gas phase; then directly immerse the catalyst in a liquid phase without handling • Pressure rating 5,500 psig (379 bar) • Temperature rating 650°F (343°C)

dd
Click here to view Product Information
Harshaw Falling Basket Catalyst Reactor

Caldwell Catalyst Testing Reactor
Low density gas/vapor recycling flow supported catalyst research tool
The design creates high circulation pressure & high mass transfer with low density gas. A 8" (200 mm) vane blower @ 2,500 rpm moves the gas past a stationary catalyst bed. Optional plating deactivates the reactor's surfaces • Pressure rating 800 psig (55 bar) • Temperature rating 950°F (510°C)

dd
Click here to view Product Information
Caldwell Catalyst Testing Reactor

MicroClave™ Catalyst Testing Reactor
A miniature reactor for precision high pressure catalyst research
Standard, miniature high pressure homogeneous & dispersed catalyst testing reactor • Pressure rating of 5,000 psig (345 bar) • Temperature ratings of either 650°F (343°C) or 1,000°F (538°C) • HASTELLOY® C-276 material • Metal seals • Magnetic mixer (5,000 rpm MagneDrive®) • ASME Code stamp option

dd
Click here to view Product Information
MicroClaveT Catalyst Testing Reactor
 

 




Match:
any search words
all search words


Results per page:

Parker Autoclave Engineers
Research Tools Products
8325 Hessinger Drive
Erie, Pennsylvania 16509 USA
Phone: 814.860.5700
Fax: 814.866.7748

Contact Us

Valves, Fittings, and Tubing Looking for Valves, Fittings and Tubing?

fg Click here to view our sister division...
Parker Autoclave Engineers
Valves, Fittings, & Tubing

Bookmark and Share



2014©All Rights Reserved • Parker Autoclave Engineers • Erie, PA USA